Trimble R12 Base & Rover GNSS Surveying

Trimble R12 GNSS receiver stands out for accurate reception in challenging GNSS environments. Trees and buildings pose little challenge to this new receiver thanks to the real-time ProPoint GNSS technology in the R12. The R12, the long-lasting battery, and the robust design (IP-67 rating) ensure increased productivity.

The Trimble R12 is the latest GNSS receiver that pushes the boundaries of highly accurate measurement even in the most difficult conditions. GNSS The Trimble R12 is packed with new technologies, Trimble ProPoint GNSS, SurePoint ™ electronic level and tilt compensation, Trimble CenterPoint ® RTX, and Trimble xFill, which are installed in a small, durable, and elegant device. The most powerful Trimble R12 GNSS receiver with the latest technologies will allow you to work with the best the market currently offers!

The Trimble R12 is a high-precision GNSS receiver used for surveying, mapping, and geospatial data collection. It provides accurate location data and uses satellite constellations such as GPS, GLONASS, Galileo, BeiDou, and QZSS.

Key features of the Trimble R12:

• Trimble ProPoint™ GNSS Technology – Improved performance in challenging GNSS conditions, with groundbreaking signal management that leverages the latest developments in GNSS signal infrastructure and Trimble receiver hardware.
• Trimble SurePoint™ Technology – Precise position capture with eBubble and compass-based tilt compensation.
• Trimble CenterPoint® RTX Corrections Technology –  Provides RTK-level precision worldwide without needing a base station or VRS network.
• Trimble 360 Technology  – 672 channels with support for all available and future GNSS signals and improved protection from interference and spoofed signals.
• Trimble xFill® Technology – Keeps you working in radio and cellular black spots with continuous RTK coverage.

The Trimble R12 GNSS receiver is designed for high-precision measurements and positioning during geodetic, topographic, and construction surveys. This fifth-generation Trimble GNSS system uses innovative processing technologies to provide a quality solution with up to 30% increased speed and reliability in the most challenging satellite signal environments.

The Trimble R12 receiver is based on the modern 672-channel Trimble Maxwell 7 chipset with a powerful processor that allows you to receive and process signals from all existing GNSS constellations in all bands. At the same time, the system’s power consumption is reduced by a third.

What is the difference between Trimble R12 and R12i?

The Trimble R12 and R12i are high-precision GNSS receivers designed for surveying, mapping, and collecting geospatial data.

However, there are some differences between the two models.

1. Internal Radio: The Trimble R12i has an internal 900 MHz radio modem, which can be used for RTK corrections and data communication. The R12 has no internal radio but can be used with an external radio for RTK corrections.
2. Performance in challenging environments: The Trimble R12i is designed to work better in challenging environments such as urban canyons and tree canopies. It has an improved ability to track GNSS signals, even in difficult conditions.
3. Accuracy: The Trimble R12i has an improved accuracy rating than the R12. The R12i can provide centimeter-level positioning accuracy in RTK mode, while the R12 provides sub-decimeter-level accuracy in RTK mode.
4. Compatibility with correction services: The Trimble R12i is compatible with Trimble CenterPoint RTX correction service, which provides GNSS corrections via satellite. The R12 is not compatible with this service.
5. Price: The Trimble R12i is more expensive than the R12 due to its improved features and capabilities.

In summary, the Trimble R12i is an improved version of the R12, with additional features such as an internal radio modem, improved performance in challenging environments, a higher accuracy rating, and compatibility with the Trimble CenterPoint RTX correction service.

R12 LT GNSS Receiver Includes:

• Trimble R12 GNSS receiver – version without or with UHF radio
• R12 Rugged Transport Case
• Two R12 Rechargeable Batteries
• R12 Dual Battery Charger with Battery Slot Inserts and Power Supply
• R12 Quick Release Adapter
• R12 UHF Radio Antenna
• Durable plastic suitcase
• Adapter for quick disconnection from the plug
• Cables for connection
• GSM antenna
• Trimble Access Software
• Trimble Business Centre

Trimble R12 GNSS Specifications:

• Supported satellite systems:

• GPS: L1C/A, L1C, L2C, L2E, L5
• GLONASS: L1C/A, L1P, L2C/A, L2P, L3
• SBAS: L1C/A, L5 (WAAS, EGNOS, GAGAN, MSAS)
• Galileo: E1, E5A, E5B, E5 AltBOC, E6
• BeiDou (COMPASS): B1, B1C, B2, B2A, B3
• QZSS: L1C/A, L1S, L1C, L2C, L5, L6
• NavIC (IRNSS): L5
• L-band: CenterPoint RTX

• Modes of measurement – ​​static measurement, RTK measurement, as base (base), kinematic method
• GNSS chip with 672 channels
• IP67 certification

• dust resistant
• protected against temporary immersion to a depth of 1 m
• humidity – 100% condensing
• shocks – withstands falling from a height of 2 m onto concrete
• vibration – MIL-STD-810F, FIG.514.5C-1

• Operating temperature: -40°C to +65°C
• RTK accuracy (one base): horizontal 8 mm + 1 ppm, vertical 15 mm + 1 ppm
• RTK accuracy (VRS): horizontal 8 mm + 0.5 ppm, vertical 15 mm + 0.5 ppm
• Static and FastStatic accuracy: horizontal 3 mm + 0.5 ppm, vertical 5 mm + 0.5 ppm
• xFill accuracy: horizontal – RTK + 10 mm / minute RMS, vertical – RTK + 20 mm / minute RMS
• Battery: rechargeable Li-Ion, replaceable 7.4 V, 3.7 Ah, with intelligent LED status indicator
• Number of supplied batteries: 2 pcs
• Duration on 1 battery: 6.5 hours
• Dimensions: 11.9 cm x 13.6 cm including connectors
• Weight: 1.12 kg (with internal battery), 3.95 kg (with probe, controller and holder)
• Supported control units: Trimble TSC7, Trimble T10, Trimble T7, Trimble TSC3