eSurvey E300 Pro
eSurvey E300 Pro
Full-featured RTK Receiver
The eSurvey E300 Pro is a fully functional GNSS receiver with an extremely compact design by eSurvey GNSS. With its high-performance GNSS board, it can track all present constellations and satellites. The GNSS, Wi-Fi, Bluetooth, and GSM four-in-one antenna, stable data transmission, RTK Aid, and IMU function, make it suitable for all surveying applications
-
Description
Overview
Power Indicator: An Intelligent Hint of Working Time
Quickly check the remaining battery power in real time and figure out the working time without data loss.
Integrated Tx/Rx UHF Modem in a Compact Design
The built-in transceiver radio modem in the compact design of the E300 Pro makes it a full-featured and portable GNSS receiver that works as either base or rover station.
Rugged Design: Better Resistance to Shock and Fall
Use it for many years, for it is strongly made and capable of withstanding rough handling.
RTK Aid Function: Uninterrupted Work
Work without interruption even when RTK corrections fail, powered by our RTK aid function.
Multi-constellations and Multi-frequency
With 1408 channels of GNSS tracking, the E300 Pro provides stable and reliable centimeter-level positioning accuracy in real-time to suit any field data collection applications. All GNSS signals are supported, including GPS, BDS, GLONASS, GALILEO, QZSS, SBAS, L-Band and IRNSS.
Max 60° Tilt Survey: A Different Way of Working
- Quickly measure accurate points while standing or walking without leveling the pole.
- Concentrate on where the pole tip needs to go, which is especially useful during a stakeout.
- Easily start a survey in environments that are hard to reach, such as building corners and slopes.
- No longer worry about the movement of the pole when measuring, provided that the pole tip is stationary.
Specifications
GNSS Performance |
E300 Pro | |
Satellites tracking |
GPS | L1CA, L2P(Y), L2C, L5 |
BDS | B1I, B2I, B3I, B1C, B2a, B2b1 | |
GLONASS | L1, L2 | |
GALILEO | E1, E5a, E5b, E61 | |
QZSS | L1, L2, L5, L61 | |
IRNSS | × | |
SBAS | WAAS, GAGAN, MSAS, EGNOS, SDCM, BDS | |
L-Band | B2b PPP (Only for the Asian-Pacific region) | |
Channels | 1408 | |
Signal reacquisition | × | |
Cold start | < 30 seconds | |
Warm start | < 20 seconds | |
Hot start | < 5 seconds | |
RTK signal initialization | < 5 seconds | |
Initialization reliability | > 99.9% | |
Update rate | 20 Hz | |
High precision static | – H: 2.5 mm + 0.1 ppm (RMS)
– V: 3.5 mm + 0.4 ppm (RMS) |
|
Static and Fast Static | – H: 3 mm + 0.5 ppm (RMS)
– V: 5 mm + 0.5 ppm (RMS) |
|
RTK | – H: 5 mm + 0.5 ppm (RMS)
– V: 10 mm+0.5 ppm (RMS) |
|
Standard point positioning | – H: 1.5 m (RMS)
– V: 2.5 m (RMS) |
|
Code differential | – H: 0.4 m (RMS)
– V: 0.8 m (RMS) |
|
SBAS | – H: 0.3 m (RMS)
– V: 0.6 m (RMS) |
|
Correction data | RTCM V3.X, RTCM2, CMR | |
Data output | GGA, ZDA, GSA, GSV, GST, VTG, RMC, GLL, Binary | |
Power Supply |
||
Battery | Rechargeable
Built-in Lithium-ion battery x 1 7.2 V ~ 6800 mAh |
|
Voltage | 9 – 28V dc | |
Working time | Up to 12 hours | |
Charging time | Typically 4 hours | |
Internet Modem |
||
Supported band | Global 4G
– LTE FDD: B1, B2, B3, B4, B5, B7, B8, B12, B13, B18, B19, B20, B25, B26, B28 – LTE TDD: B38, B39, B40, B41 – UMTS: B1, B2, B4, B5, B6, B8, B19 – GSM: B2, B3, B5, B8 |
|
System |
||
Operation system | Linux | |
Internal memory | 8 GB | |
Bluetooth | BT 5.0 + EDR, BLE | |
Wi-Fi | 802.11a/b/g/n/ac | |
SIM card | yes | |
TF card | × | |
TNC | Connect internal radio with antenna | |
5-pin port | Connect to external radio and external power; NMEA output | |
7-pin port | × | |
Type-C port | Charge and data transmission | |
Web UI | View status, update firmware, set up working mode, download data, etc. | |
Intelligent voice | Broadcast working mode and status | |
MEMS | Fast initialization, dynamic tilt survey up to 60° | |
Physical |
||
Dimension | 158 mm x 53 mm | |
Weight | 940 g | |
Operating temperature | -30℃ – +65℃ | |
Storage temperature | -40℃ – +80℃ | |
Water/dustproof | IP67 | |
Shock | – Withstand topple over from a 2 m survey pole onto hard surfaces
– Survive a 1.2 m free drop |
|
Vibration | Vibration resistant | |
Humidity | Up to 100% | |
Indicators | Satellites, datalink, battery, Bluetooth | |
Button | The power button, short press to voice broadcast working mode and status | |
Screen | × | |
Certificate | CE, FCC, NGS, IGS | |
Internal Radio |
||
Type | TX and RX | |
Emitting power | 1 W | |
Operation range | – 3 – 5 km typically
– 10 km with optimal conditions2 |
|
Frequency range | 410 – 470 MHz | |
Channel spacing | 6.25 KHz3 / 12.5 KHz / 25 KHz / 280 KHz4 | |
Protocol | Satel, PCC, TrimTalk, TrimMark III, TRANSEOT(PCC-GMSK), South, HiTarget, GEOTALK, GEOMK3, HZSZ, 900M Hopping4 |