Back

South J1 Base

Improving Never Stops

J1 is designed to enhance your performance in the field survey and to provide the most reliable positioning result.
It integrates a 1598 channels world leading GNSS positioning engine, high precision IMU, long range UHF radio and new interact operating system.
More features are to be discovered by you…

More channels and all constellations tracking

With 1598 GNSS channels solution, J1 can support multi-constellation and multifrequency tracking with the help of high-performance GNSS antenna.

More powerful inbuilt radio

Coupling a high-performance UHF module with Farlink communication technology,
which increases signal sensitivity and transmission efficiency, J1 really achieves the goal
of a 8~15km ultra-long-distance working range. And the power consumption of this
carrying new generation module is 60% lower than additional UHF, making the Base
working time is much longer.

Superior Endurance, Up to 25 hours working

J1 uses a built-in 10000mAh ultra-large capacity Li-ion battery, which can last 25
hours of continuous work (Static) benefits from low power consumption circuit design.
The Type-C interface is used on J1 that it can support fast charging through a charger
with PD protocol, and it can be full charged in 4 hours.

Double data backup

The measured data can be simultaneously stored into both internal memory of
receiver and controller, realizing the measured data double backup, which effectively
avoid data loss.

Outstanding IMU measurement

Built-in 4th-generation IMU automatic compensator corrects the coordinates to the
pole tip, assisting surveyors to quickly and accurately measure or stake out point at will
without strictly leveling the receiver, the tilt angle range can achieve up to 60°.

Upward and hidden UHF antenna design

Upward UHF antenna design, achieving all-direction UHF signal receiving and
transmitting. And the antenna interface is hidden into top cover that effectively avoid
accident breaking, protect from water and dust.

Intelligent base signal locking technology

Using one-to-one signal tracking and locking technology, and the independent
frequency under Farlink protocol, the J1 rover can continuously lock and capture the
target base station signal to reduce cross-frequency interference even though other
base stations are working nearby with the same channel.

Smart system management-ROS

J1 is integrated with the ROS system, which comes with intelligent deployment of
multi-mode hardware components, strong computing power and an intelligent
scheduling mechanism, and coupling with an ultra-fine memory management
mechanism, making the fluency and running speed of the receiver comprehensively
improved.

Specification

GNSS Features Channels 1598
GPS L1C/A, L2C, L2P, L5
GLONASS G1, G2, G3*(reserved)
BDS B1I, B1C, B2I, B2a, B3
GALILEO E1, E5A, E5B, E5AltBOC, E6
SBAS EGNOS, WAAS, GAGAN, MSAS, SDCM(L1,L5)
QZSS L1C/A, L1C, L2C, L5, L6
Navic On module L-Band (Reserve) L5*(reserved)
Positioning output rate 1Hz~20Hz
Initialization time < 10s
Initialization reliability > 99.9%
Positioning Precision* Real-time kinematic (Baseline<40km) Horizontal: 8 mm + 0.5 ppm RMS
Vertical: 15 mm + 1 ppm RMS
GNSS Static Horizontal: 2.5 mm + 0.5 ppm RMS
Vertical: 5 mm + 0.5 ppm RMS
Standalone Horizontal: 1.2m Vertical: 1.9m RMS
DGNSS Horizontal: 0.4m Vertical: 0.7m RMS
SBAS positioning Horizontal: 0.6m Vertical: 0.8m RMS
IMU tilt compensation typically less than 10mm + 0.7 mm/° tilt down to 30°
IMU tilt angle 0° ~ 60°
Hardware Performance Dimension 165mm(φ) × 108mm(H)
Weight 1.35kg (battery included)
Material Magnesium aluminum alloy shell
Operating temperature -45℃ ~ +65℃
Storage temperature -45℃ ~ +85℃
Humidity 100% Non-condensing
Waterproof/Dustproof IP68 standard, protected from long time immersion to depth of 1m
IP68 standard, fully protected against blowing dust
Shock/Vibration Withstand 2 meters pole drop onto the cement ground naturally
Power supply 9-28V DC, overvoltage protection
Battery Inbuilt 10000mAh rechargeable, unremovable Li-ion battery
Battery life* Static: 20~25hrs
Base: 10~12hrs
Rover: 16~20hrs
Camera 2 MP
FOV 75°
WIFI Modem 802.11 b/g standard
WIFI hotspot Receiver broadcasts its hotspot form web UI accessing with any mobile terminals
Communications I/O Port 5-PIN LEMO external power port + RS232
Type-C interface (charge + OTG + Ethernet)
1 UHF antenna interface
1 PPS ouput interface
SIM card slot (Micro SIM)
Internal UHF 3W receiver and transmitter
Frequency range 410 – 470MHz
Communication protocol Farlink, Trimtalk450s, SOUTH, HUACE, Hi-target, Satel
Communication range Typically 8-15km with Farlink protocol
Cellular mobile network 4G cellular module standard
Bluetooth Bluetooth 4.2 standard, Bluetooth 2.1 + EDR
NFC Communication Realizing close range (shorter than 10cm)
automatic pair between receiver and controller
Data Storage/Transmission Storage 16GB SSD internal storage standard, extendable up to 64GB
Automatic cycle storage
Support external USB storage
The customizable sample interval is up to 20Hz
Data transmission Plug and play mode of USB data transmission
Supports FTP/HTTP data download
Static Data format STH, Rinex2.x, Rinex3.x
Differential data format CMR, RTCM 2.x, RTCM 3.x(MSM included)
Position output data format NMEA 0183, PJK plane coordinate, SBF
Network model supports Fully support NTRIP protocol
Sensors Electronic bubble Controller software can display electronic bubble, checking leveling status of the carbon pole in real-time
IMU Built-in IMU module, calibration-free and immue to magnetic interference
Thermometer Built-in thermometer sensor, adopting intelligent temperature control technology, monitoring and adjusting the receiver temperature
User Interaction Operating system Linux
Buttons Dual button
Indicators 3  LED indicators
Web interaction With the access of the internal web interface management via WiFi or USB connection, users are able to monitor the receiver status and
change the configurations freely
Voice guidance It provides status and operation voice guidance
Secondary development Provides secondary development package, and opens the OpenSIC observation data format and interaction interface definition

*The data comes from the SOUTH GNSS Product Laboratory, and the specific situation is subject to local actual usage.

 

South G7Q Rover

 

Extraordinary GNSS….

The GNSS unit of G7Q is integrated with an advanced SoC which is a chip comes with the advantage of high integration and low power consumption, efficiently suppress the interference signals, and obtain higher quality observation data from satellite constellations.

Combines with powerful GNSS RTK engine with 1598 channels, and the new generation high sensitivity antenna, G7Q achieves centimeter precision in seconds while fully tracking GPS, GLONASS, BEIDOU, GALILEO and QZSS signals.

Brilliant design

Single button boot design, one button evokes all RTK operations.

The body screen adopts a translucent high-strength panel, which has a stronger visual sense of technology. Plus four color indicator lights, common information is clear at a glance.

Smart unit of tilt measurement

An inbuilt high performance IMU automatic compensator which corrects the coordinates to the pole tip, that assists users quickly and accurately measure or stake out points at will without strict leveling the receiver, it helps surveyors boost productivity by 30 percent. Furthermore, the compensation is still available even though the fixed solution is lost at a short time, surveyors are able to continue the job after fixed solution recovers without initializing again for the IMU module. And the tilt angle range can achieve to 60°.

Unmatched connectivity

Built-in SOUTH self-developed digital radio, with an advanced protocol “Farlink”, makes G7Q achieve the typical working range as 8km. The transmission bandwidth of “Farlink” becomes large, and it increases the sensitivity of radio signal capture, which perfectly solves the problem of large data volume of multiple constellations transmission. And the power consumption can reduce about 60% in the same amount of data transmission compare to the traditional RTK.

Unlimited productivity

The new generation of SoC platform gives RTK more stable performance and lower power consumption. The built-in 6800mAh high-performance battery can support more than 15 hours of continuous operation. Featuring with a universal type-C interface, G7Q allows to charge the built-in batteries with a PD rapid charger, and support power supply from a power bank to ensure a full-day work.

Both internal memory and web interface are accessed by this type-C interface simultaneously without switching working mode for this port.

Specification

GNSS Features Channels 1598
GPS L1, L1C, L2C, L2P, L5
GLONASS L1C/A,L1P,L2C/A,L2P,L3
BDS BDS-2: B1I, B2I, B3I, BDS-3: B1I, B3I, B1C, B2a, B2b*
GALILEOS E1, E5A, E5B, E6C, AltBOC*
SBAS(WAAS/MSAS/EGNOS/GAGAN) L1*
IRNSS L5*
QZSS
MSS L-Band (Reserve)
L1, L2C, L5*
Positioning output rate 1Hz~20Hz
Initialization time < 10s
Initialization reliability > 99.99%
Positioning Precision Code differential GNSS positioning Horizontal: 0.25 m + 1 ppm RMS
Vertical: 0.50 m + 1 ppm RMS
GNSS static Horizontal: 2.5 mm + 0.5 ppm RMS
Vertical: 5 mm + 0.5 ppm RMS
Real-time kinematic
(Baseline<30km)
Horizontal: 8 mm + 1 ppm RMS
Vertical: 15 mm + 1 ppm RMS
SBAS positioning Typically < 5m 3DRMS
RTK initialization time 2 ~ 8s
IMU tilt compensation Additional horizontal pole tip uncertainty
typically less than 10mm + 0.7 mm/° tilt down to 30°
IMU tilt angle 0° ~ 60°
Hardware Performance Dimension 135mm(W) ×135mm(L) × 83mm(H)
Weight 907g (battery included)
Material Magnesium aluminum alloy shell
Operating Temperature -25℃ ~ +65℃
Storage Temperature -40℃ ~ +80℃
Humidity 100% Non-condensing
Waterproof/Dustproof IP67 standard, protected from long time immersion to depth of 1m
IP67 standard, fully protected against blowing dust
Shock/Vibration Withstand 2 meters pole drop onto
the cement ground naturally
Power Supply 6-28V DC, overvoltage protection
Battery Inbuilt 7.2V 6800mAh rechargeable,
Li-ion battery
Battery Life 15h (Rover Bluetooth mode)
Communications I/O Port 5-PIN LEMO external power port + RS232
Type-C interface (charge, OTG, data transfer to PC or phone, Ethernet)
1 UHF antenna interface
Internal UHF 2W radio, receive and transmit, radio router and radio repeater
Frequency range 410 – 470MHz
Communication protocol Farlink, Trimtalk450s, SOUTH, HUACE, Hi-target, Satel
Communication range Typically 8km with Farlink protocol
Bluetooth Bluetooth 3.0/4.1 standard, Bluetooth 2.1 + EDR
NFC Communication Realizing close range (shorter than 10cm) automatic pair between receiver and
controller (controller requires NFC wireless communication module else)
WIFI Modem 802.11 b/g standard
WIFI Hotspot Receiver broadcasts its hotspot form web UI accessing with any mobile terminals
WIFI Datalink Receiver can transmit and receive correction data stream via WiFi datalink
Data Storage/Transmission Storage 4GB SSD internal storage standard, extendable up to 64GB automatic cycle storage (The earliest data files will be removed automatically while the memory is not enough) support external USB storage the customizable sample interval is up to 20Hz
Data Transmission Plug and play mode of USB data transmission supports FTP/HTTP data download
Data Format Static data format: STH, Rinex2.01, Rinex3.02 and etc.
Differential data format: RTCM 2.1, RTCM 2.3, RTCM 3.0, RTCM 3.1, RTCM 3.2
GPS output data format: NMEA 0183, PJK plane coordinate, Binary code
Network model support: VRS, FKP, MAC, fully support NTRIP protocol
Sensors Electronic bubble Controller software can display electronic bubble, checking leveling status of the carbon pole in real-time
IMU Built-in IMU module, calibration-free and immue to magnetic interference
Thermometer Built-in thermometer sensor, adopting intelligent temperature control technology, monitoring and adjusting the receiver temperature
User Interaction Operating system Linux
Buttons Single button
Indicators 4 LED indicators (satellite, Datalink, Bluetooth, Power)
Web Interaction With the access of the internal web interface management via WiFi or USB connection, users are able to monitor the receiver status and change the configurations freely
Voice Guidance It provides status and operation voice guidance, and supports Chinese/English/ Korean/Spanish/Portuguese/Russian/Turkish
Secondary Development Provides secondary development package, and opens the OpenSIC observation data format and interaction interface definition
Cloud Service The powerful cloud platform provides online services like remote manage, firmware update, online register and etc.

Items marked with * will be upgraded along with the update of assigned firmware

The data comes from the SOUTH GNSS Product Laboratory, and the specific situation is subject to local actual usage.
1.Actual battery life can vary depending on usage patterns and other factors. The listed parameter was obtained under controlled testing conditions.

This website stores cookies on your computer. Privacy Policy

Select your currency
USD United States (US) dollar

Created by Tomsher