DJI Zenmuse L1

AED33,200.00 VAT Excl

Category: Industrial and Enterprise

The Livox sensor has a max capable range of up to 450 meters
10 cm horizontal accuracy rating at a flight height of 50 meters
Up to 3 returns for optimal vegetation penetration (adjustable in DJI Pilot app)
Up to 240,000 points per second single return, 480,000 pts for dual
70° Scanning FOV
IP44 rating for protection against water splashed from all directions. This is a major differentiator from other systems.

Description

A Lidar + RGB Solution for Aerial Surveying

The Zenmuse L1 integrates a Livox Lidar module, a high-accuracy IMU, and a camera with a 1-inch CMOS on a 3-axis stabilized gimbal. When used with Matrice 300 RTK and DJI Terra, the L1 forms a complete solution that gives you real-time 3D data throughout the day, efficiently capturing the details of complex structures and delivering highly accurate reconstructed models.

Livox Lidar Module

Frame Lidar with up to 100% effective point cloud results
Detection Range: 450m (80% reflectivity, 0 klx) / 190 m (10% reflectivity, 100 klx)
Effective Point Rate: 240,000 pts/s
Supports 3 Returns
Line Scan Mode and Non-repetitive Scan Mode

RGB Camera

20MP
1-inch CMOS
Mechanical Shutter

High-accuracy IMU

Accuracy: 0.025° (roll/pitch) / 0.08° (yaw)
Vision Sensor for Positioning Accuracy
GNSS, IMU, RGB Data Fusion

Point Cloud LiveView
Real-time point clouds provide immediate insights onsite, so operators are informed to make critical decisions quickly.
You can also verify fieldwork quality by checking point cloud data immediately after each flight.

Exceptional Efficiency

Generate true-color point cloud models in real-time, or acquire 2 km2 of point cloud data in a single flight [1] using the Livox frame Lidar module with a 70° FOV and a visible light camera with a 1-inch sensor.

Unparalleled Accuracy

Render centimeter-accurate reconstructions thanks to the high-accuracy IMU, a vision sensor for positioning accuracy, and the incorporation of GNSS data.

Ready When You Are

The IP44 rating allows the L1 to be operated in rainy or foggy environments. The Lidar module’s active scanning method enables you to fly at night.

Complete solution for:

AEC and Surveying
- Manage the full project lifecycle using highly accurate point clouds and 3D models.
Topographic Mapping
- Quickly generate topographic maps using accurate digital elevation models.
Energy and Infrastructure
- Model sparse or complex structures in detail to manage them efficiently and safely.
Emergency Response
- Any time of the day, gather critical insights in real-time using true-colour point clouds.
Agriculture and Forestry Management
- Gain insight into vegetation density, area, stock volume, canopy width, and growth trends.
Law Enforcement
- Gain situational awareness and forensic intel in real-time to make informed decisions on site.

Exceptional Efficiency

Generate true-colour point cloud models in real-time, or acquire 2 km2 of point cloud data in a single flight [1] using the Livox frame Lidar module with a 70° FOV and a visible light camera with a 1-inch sensor.

Unparalleled Accuracy

Render centimeter-accurate reconstructions thanks to the high-accuracy IMU, a vision sensor for positioning accuracy, and the incorporation of GNSS data.

Ready When You Are

The IP54 rating allows the L1 to be operated in rainy or foggy environments. The Lidar module’s active scanning method enables you to fly at night.

Measurement and Annotation

Acquire and communicate critical dimensions on the point cloud model using measurements and annotations.

Point Cloud LiveView

Real-time point clouds provide immediate insights onsite, so operators are informed to make critical decisions quickly.
You can also verify fieldwork quality by checking point cloud data immediately after each flight.

Visualize Data as You Fly